ZenDroKat(CM11) Rom v2 for Wave I & II with Kernel Update & More Ram

cm11 v2.0

Credits:- All the credits of this ROM development go to Tigourzen and to Taxidriver05 for the detailed installation instructions. All we wave owners owe him a lot , so try and appreciate Tigourzen’s work.

 

Now lets head to the main topic:

1. Flashing BOOTFILES & FOTA:

At first, you have to flash the following files with MultiLoader, when bada is installed:

 

GT-S8500

 

BOOTFILES

 

FOTA:

 http://www.zendrokat.com/fota/armlinux_boot_NAND_S8500.fota   (Note these Fota links have to be copied in a download accelerator such as IDM and then need to be downloaded otherwise the files won’t get downloaded. DO NOT CLICK ON THESE LINKS JUST COPY AND PASTE THEM IN IDM)

GT-S8530

 

BOOTFILES

 

FOTA

 http://www.zendrokat.com/fota/armlinux_boot_NAND_S8530.fota   (Note these Fota links have to be copied in a download accelerator such as IDM and then need to be downloaded otherwise the files won’t get downloaded. DO NOT CLICK ON THESE LINKS JUST COPY AND PASTE THEM IN IDM)

ROM Files :

 

ZenDroKat ROM v2.0 (Android 4.4.0)

 

Wi-Fi & BT-Patch (GT-S8530)

Kernel v4.2:

Nand Kernel

  • 331Mo BigMem
  • 300Mo MidMem
  • 288Mo Normal
  • Update : Extreme low voltage

Link:   http://zendrokat.com/kernel/zImage    (Note Zimage these links have to be copied in a download accelerator such as IDM and then need to be downloaded otherwise the files won’t get downloaded. DO NOT CLICK ON THESE LINKS JUST COPY AND PASTE THEM IN IDM)

Sd Kernel

  • 331Mo BigMem
  • 300Mo MidMem
  • 288Mo Normal
  • Update : Extreme low voltage

Link:   http://zendrokat.com/kernelsd/zImage    (Note these Zimage links have to be copied in a download accelerator such as IDM and then need to be downloaded otherwise the files won’t get downloaded. DO NOT CLICK ON THESE LINKS JUST COPY AND PASTE THEM IN IDM )

At first you have to flash BOOTFILES. Pay attention, that you activate “Boot Change” and “LSI” in MultiLoader and don’t choose anything, when flashing FOTA.

2. Preparing device for installation:

After you have flashed both files, you have to connect. your phone with your PC running bada.
Copy extracted ROM (“clockworkmod” folder) and zImage to your SD card.
Please take care, that there is no sub folder called “clockworkmod”.
Both files have to be copied to root directory of your SD card.
To prevent errors, you should format your SD before copying files.

Well…
Now the first (and simple) part is done!

3. Installation of ZenDroKat:

Now shut down your WAVE, BUT leave your SD card in your device.
When device is powered off, enter CWMRecovery by pressing END CALL & HOME (middle button).
This may take a moment.

When you are in Recovery mode, you’ll find the following options:

  • Reboot System Now
  • Install Zip
  • Wipe Data/Factory Reset
  • Wipe Cache Partition
  • Backup and Restore
  • Mounts & Storage
  • Advanced
  • Zen Menu
  • Kernel Options

For NAND installation choose “Zen Menu” and “Open Recovery Script” and confirm your choice by pressing HOME button.
Now you’ll find several scripts. Choose “Full_Format__Nand_Bada_For_Android.ors”.

CAUTION: THIS WILL WIPE YOUR BADA INSTALLATION COMPLETELY!!!!!

For SD installation do NOT choose this script. You will have to partition your SD card. This depends on size and speed of your SD card.
When you choose SD installation, you also can move clockworkmod folder and zImage to SD, when you’re in recovery mode. For that, choose “Mounts & Storage” and “mount sd”.

DO NOT TURN OFF OR REBOOT YOUR DEVICE IN THAT STATE!!!!

When script has finished or sd is partitioned and prepared with files go back by pressing END CALL.
Please check in “Kernel Options”, if “MD5 check” is activated!

Now go to “Wipe Data/ Factory-Reset” and choose “Clean to install a new ROM!”
Your phone will be wiped completely.
Please choose also “wipe cache”, when there are problems while restoring.

When there are some problems during wiping device, please go to “Mounts & Storage” and choose “format /system” & “format /data”.
Now your device is ready to restore Android on your phone.

Go to main menu and choose Backup & Restore”.
Next option to choose is “Restore from /storage/sdcard0″.

Something like “ 2013-11-17. 19. 13.22_aosp_wave-userdebug_4.4_K…” should be listed (here it’s for AOSP-ROM).
Choose this entry and confirm.
Restoring the system may take some time! So please be calm and patient!
When something goes wrong, you have to restore element by element with option “Advanced Restore from /storage/sdcard0. But don’t restore cache!

Well…
Now the core of the ROM is installed…

4. Install patches:

Mostly it is necessary to install some patches.

For that, go back to main menu and choose “Install Zip” und “Choose zip from /storage/sdcard0.
Now choose every required patch (ZIP) one by one.
When you have installed all patches it is time for the first boot.

Go back to main menu and choose “Reboot System Now”.
It maybe required to confirm root. Confirm  “Yes – Fix Root!”.

Your phone will reboot automatically!
First boot of your device may take up to 5 minutes.
Do NOT interrupt boot process!

When installation is done, you’ll be asked for PIN code or led automatically to home screen.

Congratulations!
You have successfully installed Android “KitKat” on your WAVE smartphone!

If you have any problems or questions, you can contact us and other users in our chat.

17 Comments

  1. rooting android
    Dec 20, 2013 @ 23:29:21

    This is undoubtedly the most effective internet sites I’ve got go through many thanks for the very good posts and also retain these arriving they aid myself cross some time about the air carriers while reading through in our android os tablet.

    Reply

  2. enrico
    Dec 22, 2013 @ 00:03:32

    hi….but sd installation is a dual boot with bada….can i choose between bada with End call and Android with start call+end call?is it a dual boot???
    i have on my s8500 bada 2.0 + Android 4.3.1 cm10.2 but with it i have problem with the charge of the battery than i want change this rom with kitkat….can you help me please

    Reply

    • rickykajale
      Dec 22, 2013 @ 00:36:19

      Yes Enrico by using the SD kernel you can dual boot with bada or by using the Nand kernel you can wipe bada completely and use only Android.

      Reply

      • enrico
        Dec 22, 2013 @ 09:24:21

        ok many thanks…..
        but with nand installation , after can i reflash bada with multiloader exact?

        Reply

        • rickykajale
          Dec 22, 2013 @ 09:57:43

          Yes Enrico after Nand Rom installation you can remove the Android OS completely by reflashing Bada 2.0 using Multiloader.

          Reply

          • enrico
            Dec 25, 2013 @ 09:14:43

            ok… i make it now…
            are there many bugs?

  3. enrico
    Dec 25, 2013 @ 10:01:29

    hi. I have made a nand installation but I have a small doubt
    the point 4 I have not succeeded in completing it because when I have done “Install Zip” when I have done “Choose zip from / storage/sdcard0 I have not found any files…
    my cell is s8500 I have to also download Wi-Fi & BT-Patch (GT-S8530) or this are only for s8530?

    Reply

  4. enrico
    Dec 26, 2013 @ 13:16:43

    hi , i have tested it on my s8500 with a nand installation…there are any bugs in this rom…there are some bugs :
    –the keyboard aosp often crash
    –there are not the vocal imput in thekeyboard
    –I cannot close the smartphone because automatically ever it restart
    –when i set CPU governor on powersave the smartphone become very very slow and block it
    –and other little bugs
    have you news for a possible v3?

    Reply

  5. enrico
    Dec 30, 2013 @ 09:24:33

    i can choose for 2g and 3g but if i choose 3g it works only in edge (E)…no umts or hspda than is very slow….with the wifi it works well

    Reply

  6. Mark Aldrich Ubando
    Jan 11, 2014 @ 09:02:50

    hi there!!

    I saw a comment there that we can use android only on wave….but I dont know how to remove bada 2.0 completely…I just know how to upgrade it to dual boot with bada 2.0 and android 4.3..(currently installed ROMs)

    Reply

  7. Mark Aldrich Ubando
    Jan 11, 2014 @ 09:03:10

    hi there!!

    I saw a comment there that we can use android only on wave….but I dont know how to remove bada 2.0 completely…I just know how to upgrade it to dual boot with bada 2.0 and android 4.3..(currently installed ROMs)

    Please do teach me…perhaps..make a video please?

    Reply

  8. rickykajale
    Mar 05, 2014 @ 17:16:07

    Hi Saurabh, all the micro SD cards are compatible with badadroid roms. There is no bug as far as i know in the latest badadroid rom updates, related to memory card reading reading issues. So you can use any class of micro sd cards, but just make sure not to use the Hyper speed series of SD cards in any device, because those are only meant for Ultra High end devices.

    Reply

    • Saurabh
      Mar 06, 2014 @ 01:27:19

      Hi rickykajale

      Actually i m bada 2.0 user and had not done anything like flashing….just have tried spoofing on bada 2 that also on stock bada.

      I hve good knowledge about android.

      But i dont know much about fota bootfile.

      Please guide me and if possible plz give me ur whatsapp no. to me on saurabhirsee@gmail.com

      Thnx in advance

      Reply

      • rickykajale
        Mar 08, 2014 @ 14:14:15

        Buddy checkout this link and it might help you out LINK

        Reply

  9. beemadeal.com
    Apr 12, 2014 @ 04:20:21

    Great blog! Is your theme custom made or did you download it
    from somewhere? A design like yours with a few simple
    adjustements would really make my blog stand out.
    Please let me know where you got your design.
    Appreciate it

    Reply

  10. amycmann.com
    Jun 18, 2014 @ 22:41:18

    I’m curious to find out what blog platform you are working with?
    I’m experiencing some small security problems with my latest blog and
    I’d like to find something more safeguarded. Do you have any recommendations?

    Reply

    • rickykajale
      Jul 10, 2014 @ 15:39:22

      Hi blogger i would be happy to assist you with your security issues but firstly could you specify which platform you are using so accordingly i might be able to assist you.

      Reply

Leave a Reply