Zendrokat v2.3 Badadroid Rom Update


Another Update for the renowned Badadroid Rom Zendrokat, by the developer Tigourzen.

This update is more like an update under the hood.

Change log:

  • Browser last revision, private browser + optimization (much smoother),
  • Last cam revision. Front camera is now working,
  • GPS patch has been integrated in the ROM and is working fine
  • General performance optimizations

Install notes:

After downloading the “clockworkmod.zip”, extract it and put it on root directory of your SD card.
Then boot into “Recovery Mode”. Go to “Miscellaneous Nand Settings” and untick “MD5 check”! Otherwise installation will fail!
Important:  format your system : Mount and Storage > format /system

For installation you need restore rom again for users who have allready installed Zendrokat before but without format so as to have good system performance)
After the above procedure restore the ROM like other ZenDroKat ROMS. No need to wipe. So there will be no data loss.

Don’t forget Wave II need patch after the installation:  bt+wifi



ZenDroKat V2.3

Clock APK



  1. serkan
    April 1, 2014 @ 11:38 am

    This zen rom… How working???


    • rickykajale
      April 2, 2014 @ 4:10 pm

      It’s working pretty much fine, i would recommend it for a regular use because its almost bug free.


  2. Mla Emmanuel Zondo
    July 5, 2014 @ 7:02 am

    after rebooting , the stays blank , it does not show the android boot screen . Am i missing a step or what? please help


    • rickykajale
      July 5, 2014 @ 5:40 pm

      Hi Emmanuel, if you are facing the problem of a blank screen i would suggest you to carry out the installation on a fresh bada Rom after flashing with multiloader and then try to install badadroid, be patient on installing badadroid for the 1st time because the 1st boot takes a while ranging from 1-5 mins. I hope this helps you out.


      • Debobrata
        July 21, 2014 @ 7:25 pm

        I am facing the same problem. Its completely blank even after 5 mins. If I go back to Zendrokat 2.0 its working fine.


        • rickykajale
          July 28, 2014 @ 6:16 pm

          Buddy just try to reflash your bada using Multiloader v5.67 and then carry out a fresh installation of badadroid. I’m sure then everything will work fine.


          • Debobrata
            July 31, 2014 @ 2:30 pm

            I have tried all that and still I do not get any display after loading this Zendrokat 2.3.

          • rickykajale
            October 12, 2014 @ 7:39 am

            Could you specify what installation procedure did you use

  3. sahejeet
    September 16, 2014 @ 11:21 am

    sir can you please give me clock apk on my email add. i think the server of the site which you have given is down …. sir it will be very kind of yours…


  4. Nagendra
    October 15, 2014 @ 5:43 am

    1 I flashed fresh bada os.
    2 After copied the zimage file into sd card & insert to the phone and again flash with armlinux_boot_NAND_S8530 file.
    3 After Copied Zimage file and clockworkmod folder into sd card.
    4 Starting with recovery mode choose restore & backup menu then restore choose rom 2013-10… and Yes – Restore
    But it says restore failed.

    some times restore process after 290 mb done says restore error….

    what mistake i done please Help me @ rickykajale


    • rickykajale
      October 31, 2014 @ 1:50 am

      The only mistake you did is that you copied the zimage into the SD card, instead you should have copied it into your phone memory


    October 22, 2014 @ 8:26 am

    clock.apk link not working @ricky.
    how do i install gpu.rar??
    Any idea about fm (on air) without data pack consumption??


    • rickykajale
      October 31, 2014 @ 1:44 am

      i did not quiet understan what you meant to tell, especially what did you mean by GPU.rar


  6. mojojo
    January 6, 2015 @ 9:52 am

    what is the use of clock apk? sorry just new here


    • rickykajale
      January 9, 2015 @ 6:16 am

      It’s just a Android clock widget .apk file used instead of the regular android clock


  7. sanjay
    January 23, 2015 @ 8:56 pm

    fota is corrupted in this link, and showing file not found error, reverted to turko cfw 10.1, phone is back to life again


    • rickykajale
      January 25, 2015 @ 6:55 am

      Let me check into the issue and then i’ll try to contact the developer for resolving the issue, but thanks for investigating into the problem


  8. Souparno
    February 21, 2015 @ 7:31 pm

    after flashing fota and boot file its showing “FILE NOT FOUND” on top the screen followed by below the “WAVE” in dotted red colour pls help @ricky


    • rickykajale
      February 23, 2015 @ 6:59 am

      Did you setup the multiloader in the required mode before flashing, please provide more details so that i might be able to help you out.


  9. sharath
    April 9, 2015 @ 1:53 am

    Hey i’m unable to download patch please send me the file or update link


    • rickykajale
      April 11, 2015 @ 8:35 am

      Sharath there is no link for a patch just the clock apk


  10. Abdelrahman
    May 14, 2015 @ 3:02 am

    Hey, after flashing fota and bootfiles the screen either goes black or a wave icon appears with file not found above it? also the zimage should be copied to the sd card to to the phone memory?


    • rickykajale
      May 31, 2015 @ 6:06 pm

      just try to flash a fresh bada OS the after that you must try to flash the badadroid OS and yes the the zimage file must be copied to the phone memory


  11. adyajit
    June 28, 2015 @ 1:15 pm


    I have used this ROM (http://www.badadroid.in/badadroid-roms/android-4-4-kitkat-for-wave-12/#comment-4489) to install android in my samsung wave2. But now my bluetooth and wifi is not working.

    Please give me any patch to resolve this issue. and the procedure also.



    • rickykajale
      July 15, 2015 @ 8:19 am

      Let me contact te developer and se if there is and update patch to solve the issue


Leave a Reply